Buy E Cigarettes With My Newest E-cigs Review

Wismec Active Kit Review – For Hiking, Camping or Bush Crafting Vapors

Where do you vape? At home? At the office? Or in the metro? Have you considered that vaping when you are hiking or camping? Have you considered that vaping when you are in bathing? Now the dream has come true. Today let’s see the Wismec Active Kit.

I gotta say this mod is pretty cool for a standard regulated 80w mod. What makes it stand out is its Bluetooth speaker and waterproof silicone case. I was super impressed by the quality of the silicone case and the shock value. I dropped it a few times on (on purpose for this review) on rocks, off trees, and randomly on the trail. Other than some dirt the mod functioned just fine after.

Wismec Active vape Kit

Next was water. I turned the Bluetooth speaker on and put it in the river for about 30 seconds or so. I could still hear the music playing faintly in the water and when I pulled it out and shook it off it worked perfectly.

After a few hours, I took a break and started a campfire. Sat by the fire with music playing from the mod – really impressed with the quality. I walked about 30 feet away with my phone before It started to cut out.

The box mod battery life is also very good. But I only ran it at 20w with the included wismec mtl tank. Spent a full day out in the bush, roughly 5 hrs, and I still had about 20% or so left.

The wismec active silicone cases are interchangeable and you get lots of colors. My sample came with a few and a hook tab for my belt. I like the camouflage.

Active vape starter Kit

It has a pretty standard menu and you can do TC (with the right coils). It has all the features you expect from the newest mods. I had no issue navigating the menu. The USB port must be closed for it to be waterproof so only take out the tab when charging or upgrading.

About the Active Kit‘s taste. The flavor was pretty good, as good as most my RDA’s, but unfortunately, the coil that came with burnt after 3 days use. I’m now using a falcon on it at around 50w and it is pretty damn good. Now it comes with two coils. Maybe the second is better and maybe I just got a bad coil. I was also playing with the watts at the beginning. Otherwise, the tank was quite nice. Easy to fill and take apart.

Other vape starter kits recommended:

smoant campbel kit

obs cube kit

SMOK X-Force Kit VS SMOK X-PRIV Baby Kit

A large number of vape kits products emerged in 2018, and with its compact and portable size, the low power and the normal taste, You can’t have your cake and eat it. In order to break through such restrictions, a compromise in volume and performance is achieved, today we will share these two kits and make a comparison: SMOK X-Force Kit and SMOK X-PRIV Baby Kit.

The smok x-force vape kit is made of plastic, so it is very light, with a fine surface treatment and a shiny spray process, making it completely free of plastics and full of high-grade metal. The chic mid-axis projection design brings a stereoscopic visual impact to the X-character design, which is stunning at the moment. The SMOK logo-integrated large-area button on the side makes it easy to use. At the same time, its volume is controlled by the size of a typical cigarette box. It is hard to imagine a kit with a capacity of 7 ml of e-juice and 2000 mAh. It can also be so tiny. The tailor-made ceramic coil not only has a qualitative improvement in the taste but also makes its mini atomizer a reusable environmentally friendly component.

X-Force Kit 45W

About the smok X-Force’s performance. In fact, its 0.31-ohm resistance can bring a very strong outbreak, and it is estimated that the matching power should be above 40W. Regardless of the amount of heat, the amount of smoke, and the speed at which the ignition responds, it is very satisfying. If you only talk about the explosive taste and smoking experience, it feels no different from using the regular box mods. It’s not like the light wind and drizzle of a pod system, but quite a bit of tempo and heavy rain, even satisfying the needs of DL vape. The overall outbreak experience is quite good.

The smok x priv baby vape kit is similar in appearance to the 225W version. The ignition key set also shows the family lineage of SMOK. Whether it’s a frontal finger press or a reverse side through the palm position, it shows a handy experience in the ignition operation. The chip is also the regular setting of SMOK, the difference is only to reduce the power to 80W. The original atomizer is TVF12 BIG BABY tank, and there are many coils available under SMOK. The finished coil of the 80W kit is Q2 (0.4 ohms), which is a balanced coil, its output requirements are not high, the smoke performance is moderate, and the positioning of the kit is just right.

buy X-PRIV Baby Kit

About the X-PRIV Baby Kit’s performance. Although the size is greatly reduced, the function has not shrunk, in addition to the commonly used power function, temperature control, memory mode, for friends who like the ultimate custom taste is also very practical. The 2-inch large screen display also brings a great reading experience. 2300mAh built-in battery, if used for replacing cigarette, it has no problem if you fire at 15W in 2 days.

In general, both of these two portable, large capacity and powerful kits, which are worth recommending.

Another kit review like:

Wismec LUXOTIC MF Box Kit VS Vandy Vape Simple EX Kit, You Choose Which One?

Naked 100 Cream Go Nanas, Cuban Blend and Yummy Gum E-juice Review

Naked 100 Vape Juice is a brand manufactured by the Schwartz e Liquid group which has a vision of fruity simple flavor profiles that require no hype. Today we are going to check out three of Naked 100’s e-juices: Cream Go Nanas, Cuban Blend, and Yummy Gum.

They come in only 60ml bottles and is available in 0, 3, 6, 12mg nicotine options. I’ll be reviewing the 3mg version. Both three types of e-juice are designed in a simple and generous pattern. The PET bottle is labeled purely natural, and the black bottle cap is fresh and elegant. There is no swanking pattern but it is still pleasing, which is due to the excellent reputation that Naked 100 has left after the hot sale in the international market. List of recipes for e-juice from the side of the brand: Typical bubble gum flavor, with an added signature strawberry twist for Yummy Gum; Fine Caribbean Tobacco flavor for Cuban Blend; Ripened bananas and vanilla whipped cream for Cream Go Nanas.

The device I used to taste is Vandy Vape Pulse X squonk Kit, and the atomizer is the finished RDA: Pulse X BF RDA. Here I thank vapesourcing vape shop online to offer me these again.

The first one is Cream Go Nanas e-juice. After opening the bottle, a strong banana smell came out, I thought this e-juice must be very thick and greasy. The first inhalation, I wonder if my mouth has a problem? Where is the banana flavor? The second inhalation, carefully tested, found that the flavor is indeed banana and cream. Compared with the smell of banana, it is more like being brought by a sweet milk flavor. The taste of cream is more dominant than the taste of bananas. I thought I would get greasy, but I didn’t, and the cream taste was just right. It seems to me that the banana taste is missing a little.

buy naked 100 cream go nanas

The second one is Cuban Blend e-juice. The color of the e-juice is not particularly deep, and it has a strong fluidity and smells like a cigar. When the smoke enters my mouth, I feel rich and the taste of tobacco is pure. The taste of Cuban flue-cured tobacco stimulates the taste buds, making the tongue feel a little bun, although the taste feels more monotonous, the taste is not bad.

buy Naked 100 Cuban Blend

The third one is Yummy Gum e-juice. The balance of flavors that Yummy Gum makes me convinced that I’m chewing on real strawberry bubblegum, which is the easiest vape juice to enjoy. There is little throat hit to it, no sharp flavors, just very soft and flavorful strawberry gum. On the inhale, unapologetic bubblegum flavor wakes up the taste buds. On the exhale, a powerful dose of strawberry bursts on the tongue.

buy Naked 100 Yummy Gum

In general, Naked 100 has earned a place in the vape community as one of those e-liquid lines that everyone enjoys. Maybe not every flavor, but there is something here for everyone.

Wismec LUXOTIC MF Box Kit VS Vandy Vape Simple EX Kit, You Choose Which One?

In 2018, it was not only a year of intense competition for pod systems, but also a year of various squonk kits show their budding. Today we will make a comparison evaluation about two squonk kits which I bought from vapesourcing vape online shop: Wismec LUXOTIC MF Box Kit and Vandy Vape Simple EX.

Firstly is the Wismec LUXOTIC MF Box Kit.

In sense, the LUXOTIC MF is not a real squonk kit. The Luxotic MF box has two usage modes, you can choose squonk mode and TC box mode. In squonk mode, a 7ml BF plastic bottle and a single 21700 battery are available; In TC box mod, it supports two 18650 batteries, and the maximum output power can reach to 100W. The box also offers optional boards such as a semi-mechanical output board with indicator lights or a voltage regulator board with a 0.91″ OLED screen.

LUXOTIC MF Box Kit 100W

About the wismec LUXOTIC MF’s performance. Whether you prefer Squonking or standard dripping the performance is much the same, with the dual coils setup with the provided coils in the kit, we’re getting 0.16ohms so we’re setting the wattage to around 70-80 watts. The airflow is good and adjustable, the flavor is spot on and nothing to complain about. Nice deep flavorful clouds.

Secondly is the Vandy Vape Simple EX Kit.

It has a lightweight body made of ABS plastic and nylon. On the front side, there is a fire button, a minimalistic display, a pair of adjustment keys and a USB port. At the rear end, there is a rounded removable magnetic panel with a window and a silicone bottle inside. The kit is powered by a built-in 850 mAh battery and supports VV output modes with five voltage levels for options including 3.3V, 3.6V, 3.9V, 4.2V and 4.5V. Simple EX Squonk Kit features a large 4ml e-juice capacity to meet your daily vape needs, and the squonk bottle is easy to fill and has a leak-proof design. It is intended for use with BF (bottom feeding) RDA atomizer.

Simple EX BF Squonk kit

About the vandy vape Simple EX’s performance. Turn the power to the maximum, the ignition has no delay, the button is very comfortable, and the temperature is raised immediately, and the smoke erupts instantly.4ml of e-juice capacity should be able to meet the average atomization requirement (2ml-3ml/day) unless you are gorging like a hungry fish.

In a word, both of these two kits are good at squonk mode. If you want to try various modes and like DIY, you can’t miss LUXOTIC MF; and if you like smoking high nicotine salt e-juice, Simple EX is your best choice.

Marrow Vapors Nicotine Salt Classic Tobacco and Nut Tobacco e-juice Review – Awesome in relieving addiction

The goal of this review is Marrow Vapors Nicotine Salt e-juice. There are four flavors of this e-juice. This time, we give a review about the classic Tobacco and Nut Tobacco flavor, both are nicotine salt e-juice.

30ml small PET transparent bottle, the front sticker is printed with a molecular structure pattern, as well as flavor.

The device used in this review is the Vaporesso Renova Zero Pod System Kit ( thanks vapesourcing electronic cigarette online shop). Because this pod system can change the atomizer, I have several atomizers, which will ensure that there is no mixed odor when changing e-juice. This Renova Zero has a bigger amount of smoke and better tastes on the e-juice.

Nut Tobacco E-Juice

Firstly I tasted the Nut Tobacco flavor. After injecting the e-juice and fully infiltrating the coil, start inhaling. I felt that the relief of addiction is so agile, it has a tobacco flavor, tastes careful, has a light nutty taste, didn’t choke, and slowly feels good. The hitting throat of smoking the nicotine salt e-juice is smooth, but if the content is large, it will itch in the nose, sometimes it will sneeze. This also indicates that the cheap e-juice has a higher nicotine salt content.

The second one is the Classic Tobacco flavor. I changed the coil, washed the smoke cartridge, and began to smoke classic tobacco. The first feeling is close to other tobacco flavors, and it is more mellow. Repeated tasting, the tobacco flavor was gradually showed, the smoke is big, the throat-hitting is smooth, and the “strength” is not small, which is quite a relief of addiction.

In conclusion, the Classic Tobacco flavor and the Nut Tobacco flavor, high degree of reduction, large cloud, smooth throat-hitting, strong and awesome. The overall tobacco flavor is rich, mellow and pure, is a good nicotine salt e-juice.

Recommended E-LIQUID:

naked 100 polar breeze e-juice
naked 100 berry belts e-juice

Related review about e-juice:

Recommend You The Naked 100 Brain Freeze E Juice

How to Choose 18650 Battery As Vapors

The most important equipment for e-cigarette players is nothing more than a pure mechanical kit, a vape pen kit with protective chipset, a TC box mod, a semi-mechanical box mod, and so on. These can be roughly divided into 2 categories: the first type is directly or almost directly connected to the battery, such like a pure mechanical kit, a vape pen kit with protective chipset, a semi-mechanical box mod. The second type is the voltage regulating output through the circuit, and the TC box mod is representative of this category. So which battery is the right one to choose?

The 18650 power battery with high current output is the mainstream power source for the above equipment. Reality has the contradiction between current output capability and capacity, so it must face choice. Choosing a battery is simply a combination of the device’s output capability and the resistance limit of the player’s own DIY coil. Let’s analyze it below.

samsung 25r 18650 battery in stock

Let’s talk about the common 18650 and 18350 battery. The 18350 battery is small in size and has a much larger internal resistance than the 18650, so the output may not have the violence like the TC box mod, but the portability is good. The current mainstream continuous discharge current 18650 power battery is 30A Sony C4, as an example, assuming 0.1 ohm resistor, what is its output? Take single battery as an example, it is obtained by P=U*U/R, 4.2*4.2/0.1=176.4W, which means that the resistance is 0.1 ohm. When the battery is fully charged, the output power is 176.4W, and there is no constant voltage circuit, and the power is continuously decreasing. This needs to be understood. From P=I*I/R, I=42A, then C4 can’t stand it. What should I do? With C4 30A continuous discharge, the current reverses how small your resistance is (limit): P = U * I = 4.2 * 30A = 126W From P = I * I * R, R = 0.14 ohm. Now it’s time to know that C4 is used in the first class of equipment, and your resistance should not be less than 0.14 ohms. Of course, the ignition of the electronic cigarette is between the instantaneous discharge current and the continuous discharge current. It is said that the C4 instantaneous discharge current can reach 45A. But for safety, the bottom line of 0.14 ohms is not difficult to hold.

Samsung 30Q 18650 Battery in stock

The C4 capacity is 2100MAH, which is a little small. Samsung 30Q, LG HG2 have the capacity of 3000MAH 20A continuous discharge capacity, can’t that work? The answer is of course yes, but there is a requirement for the limit resistance of your DIY coil. From P=U*I=4.2*20A=84W and P=I*I*R, R=0.21 ohms, that is to say, this limit resistance is maintained. Samsung 30Q and LG HG2 are safe.After all, their endurance is much stronger. Although their internal resistance is about 10 milliohms larger than C4, some people say that the output of smaller internal resistance is more violent, but I also want to say that in the case of short circuit, the output is more violent. Do you understand?

In conclusion, here I highly recommend Samsung 30Q 18650 battery and Samsung 25R 18650 battery. Good quality, last-long life, which is the best choice for vapors.

Best sell 18650 battery is : Sony 18650 Battery

Soft and Lightweight – Joyetech ESPION Silk Kit With NotchCore Atomizer Review

The 80w Joyetech Espion Silk is the latest internal battery mod from Joyetech. Rated for 80 watts, it features a layer of soft hypoallergenic padding, making it lightweight and comfortable to hold. The kit also includes the Joyetech NotchCore tank. It is a 22 mm diameter tank that fits 2.5 mL of e-liquid and is compatible with the 0.45 ohm NotchCoil heads. The coils are rated for 20-30 watts and can be easily re-wicked using cotton. So how does it perform?

The look of this mod, is completely different and first impressions will always produce a frown of uncertainty, but when you hold it and feel the quality, you somewhat start to fall in love with the size, feel, and just the general aesthetics. The body is constructed with rubber-like segments, which makes it look a bit like a bumper car with bumpers fitted all around it, but this design makes it super non-slip and if you were to drop it, the rubber does absorb the majority of the impact, but as it’s so light, it will be hard to damage the mod itself. The glass tank though will absorb the majority of the damage, as with pretty much every tank on the market. The fire button has horizontal grooves etched into the plastic, making it super easy to find without looking and although it is plastic, it is well constructed and produces little to no rattle. Below the fire button is the 0.7” OLED screen, and below that are the up and down buttons fitted vertically. There’s also the USB port below the buttons, so you can charge this device when the mod is sitting upright on your desk.

The secondly is about its taste. We found that vaping at around 30W produces the best vapor and flavor, anything higher than 35 Watts you’re risking the chance of a dry hit, and that does not taste good! We also found reducing the airflow to half also helps the flavor come out more from your juice. The vape production is also really good, you’re never going to produce the same amount of vapor as the RDA‘s or even the higher wattage sub ohm tank coils, but it’s close and the flavor competes with all the best sub ohm tanks on the market.

buy Joyetech ESPION Silk

The secondly is about its taste. We found that vaping at around 30W produces the best vapor and flavor, anything higher than 35 Watts you’re risking the chance of a dry hit, and that does not taste good! We also found reducing the airflow to half also helps the flavor come out more from your juice. The vape production is also really good, you’re never going to produce the same amount of vapor as the RDA’s or even the higher wattage sub ohm tank coils, but it’s close and the flavor competes with all the best sub ohm tanks on the market.

In general, the Joytech Espion Silk is an easy to use, light and great producing vapor device. With a huge 2800mAh battery and coils which operate best around 30 Watts, experienced vapers out there will know this mod should last all day, even for the heavier vapers out there. In general, the Joytech Espion Silk is an easy to use, light and great producing vapor device. With a huge 2800mAh battery and coils which operate best around 30 Watts, experienced vapers out there will know this mod should last all day, even for the heavier vapers out there.

Other powerful kit like:

authentic smok e-priv kit
authentic smok novo kit

$30 ASVAPE ZETA RTA Review – The Compatibility of E-juice is its Charm

Under the upsurge of the mouth-sucking, a series of mouth-sucking RTA products broke out. This type of product was given the new name “MTL” by the times. After the MTL products of various brands gradually appeared in the market, the concept of each MTL and the actual experience that can be obtained are different. Even the RTA called MTL type is not an absolute loyal fan of mouth-sucking. ASVAPE attracts vapers’ attention with personalized and avant-garde products in the industry. Is the retro ZETA RTA launched under the MTL boom still maintaining the fashionable brand characteristics like its products?

Asvape Zeta Rebuildable Tank Atomizer

ZETA RTA adopts 22MM classic diameter and has a 2.5ML e-juice capacity and there are three special places after opening the package:
1. the atomizer’s intake ring provides a tight suction resistance when fully closed, and is suitable for very small wire diameter data to smoke high nicotine salt e-juice;
2. the difference between the two inlet post screws is obvious if only the mouth suction method is used, it is recommended to use a small intake screw;
3. the finished coil is loosely wound and stitched, and the material is unknown.

The dismantling of the tank requires the use of tools (such as coins). In actual use, it can be washed with water to meet daily maintenance. The tank consisting of PEI and stainless steel has a retro appearance. It is more durable than ordinary glass tubes, eliminating the violent air fall, and which is basically difficult to have a “burst” situation.

Black Asvape Zeta

The ceramic chamber is the core highlight of this ZETA. Here we first remove the physical influence of ceramic material. If we simply look at this chamber with space theory, the ceramic chamber can provide insulation shielding, and the narrowed atomization space is further improved. The feeling of compression throughout the use will make the mouthfeel firmer.

The taste of 22mm ZETA RTA has a high degree of recognition. The biggest reason comes from the compressive feeling of the narrow ceramic chamber. Under the wrapping of the ceramic chamber, the temperature inside the chamber has a certain heat preservation effect, and the smoke has a slight temperature. Its light lung suction and mouth suction also directly point to the traditional 6MG e-juice and the currently popular high nicotine salt e-juice, which has excellent performance in terms of compatibility.

High nicotine salt e-juice recommend:

brain freeze e-juice USA

hawaiian pog e-juice USA

Choose the Right Match For You – Vandy Vape Pulse BF 80W Mod Review

Squonk mod is a purely mechanical mod, cover, copper, positive and negative energies, can be said to be the same construct of mechanical mods, too much structure does not have to talk, because … it is so simple. This type of item appears to avoid frequent refilling operations. In my heart, it belongs to a convenient product. Today we will take a look at the Vandy Vape Pulse BF 80W mod.

The Pulse BF is the simple look, taking pretty much the same design as the overly popular original and unregulated Pulse BF. If you’re into your light shows or flashing LED’s then this mod is not going to suit you! It’s a pretty simple design, featuring a nice bright 0.91 inch wide OLED screen with an oversized firing button above and two small up and down buttons below. Below the 2 up and down buttons are where the USB port has been placed. The sides are empty except for one, which has a recessed window to allow you to squeeze the bottle and feed your coil. The 510 tank thread is on top placed slightly to one side with an anti-leak function to improve performance.

Pulse BF 80W new color

The key selling point of the Vandy Vape Pulse BF 80 squonk mod is the seemingly new Vandy chipset, which is a legitimate, advanced board, capable of 80 watts, full temperature control, unique firing modes, bypass mode, firmware upgrades and more.

About its appearance. The chip works really well and offers all the features that any other chip could offer. The response time is really good upon firing and nothing to complain about. The only real noticeable thing with the chip is that if the mod is left idle for some time (longer than 5 minutes) the response time is a little sluggish for the first time. Other than that the design is solid, the squonk mechanism works really well, as we expected from their previous model.

In general, For the mechanical BF mod, I think the essence and structure are not much different here, and more choices are still in appearance. The interchangeable panels, they did a great job with that. You can get these. They’re very affordable. You can rock a different looking mod every day, pro on that.

Vandy Vape Pulse BF mod free shipping

The design concept of BF box mod is a convenient development product, and how to optimize the consumer experience is what manufacturers have to do slowly.

After all, in addition to the choice of appearance, it is to pay attention to the user’s experience.

Good squonk mods like:

eleaf pico squeeze 2 tc squonk mod for sale

lost vape furyan mechanical squonker mod for sale

My other review about squonk mod:

200W Geekvape GBOX Squonker Kit Pre Sell With $62.88 in Vapesourcing

The Amazing Resolution of E-juice – Augvape INTAKE RTA Review

The brand Augvape gives me the impression that its innovation is relatively strong. Like the VTEC engine atomizer and AUGVAPE Templar RDA, which were launched in the early stage, the players can always make a deep impression and become a hot-sale product. Recently, they once again launched the Augvape INTAKE RTA. How does this product have different performances? Let’s see the experience sharing below.

From the appearance, it is obvious that the INTAKE RTA is different. The upper part of the INTAKE RTA is obviously larger than the lower part. At first glance, it will be a bit of a top-heavy sensation. When connected with the box mod or the mechanical mod, the actual overall vision is found. The effect is good. Due to the solid material, INTAKE RTA is still quite weighty.

Augvape Intake RTA 4.2ml

Compared with the traditional RTA, the individual feels that the INTAKE RTA is odd on the intake structure, and the second is on the post deck. Because it uses the top air intake, it also makes the INTAKE RTA look strange.

In order to solve this kind of problem that the top air intake will cause top-heavy imbalance, the designer still has a good solution, such as the height of the tip drip is obviously reduced, and the top cap is cut and slimmed.

In addition to the slimming treatment at the top cap, it also has a snap-on design, combined with the notch on the refilling ring, to ensure the tight connection and easy connection of the top cap and the refilling ring, and the apron below has a good Sealing, this form of design is currently rare. After the splitting, it is found that the intake adjusting ring on the refilling ring can be separated separately, and the chamber below does not seem to support splitting, which is necessarily an integral design form.

Augvape Intake RTA For Sale

In fact, the refilling ring of INTAKE RTA uses a double-layer design, which is also the requirement of the top air intake. The principle of the intake air is rough as follows: after the external airflow enters the inside of the refilling ring through the two opposite air intake holes on the refilling ring, it will enter the chamber along the outside of the inner flue and pass through the post deck. The two are collected in the air chamber where the air duct sinks to the deck, and finally, the air flow of the bottom straight blow coil is realized by the three air holes on the deck.

With Naked 100 Brain Freeze E-juice, the richness of the smoke is quite good under the premise of opening small air intake holes. The multiple fruit reduction is more realistic and layered. Even in the case of full opening of the air intake, there is no significant decrease in the richness of the smoke, but the amount of smoke is greatly increased.

In fact, as a single coil RTA, individuals still recommend using a small intake of light lungs to suck, and after using the 510 drip, the taste will be even better. Although there is no problem of poor e-juice guiding in the experience, the reason why the e-juice hole of INTAKE RTA is small is still to pay attention to the amount of cotton used.