Geek Vape Archives - Buy E Cigarettes With My Newest E-cigs Review

GeekVape T200 vape mod kit review – widebody copy

We’re ending the week beautifully – with two of the funniest novelties at the same time. Also, the most interesting thing here is that they will be a kit with a fully adjustable box mod and a universal service tank. Let’s start the natural story from scratch – geekvape t200.

Parameters
Dimensions: 141.25 x 56.05 x 31.12mm
Body material: zinc alloy + plastic + silicone + eco-leather
Power supply: 2 x 18650
Chipset: AS-Chip 3.0
Power: 5 – 200W
Voltage range: up to 12V
Peak current: 45A
Operating mode: Power, TC (NI200, SS, TI), TCR, VPC, BYPASS, SMART
Temperature range: 200℉ – 600℉ / 100℃ – 315℃
Supported resistance: 0.1 – 2.0Ω

The program begins with GeekVape‘s freshly baked kit, which apparently works more intensively than its competitors. The brand’s flagship was updated a year and a half ago – a great and terrible asylum for two external batteries.

The Box mod, on the other hand, has changed significantly but retains some “profitable” moments. First of all, they did not change the decorative elements – metal, plastic, silicone, or eco-leather.

But it is the cutting and positioning of these elements that really undergo modernization. As a result, the eco-leather insert now occupies the entire side panel instead of the rear end.

The front section was won back by a huge display and filled almost “without a trace”. The novelty’s size can’t be called average – however, the 56mm width of a two-can replica is a decent number.

However, this may not be a hindrance to normal ergonomics due to the rounded back, smooth edges and good control placement. The landing pad is steel – with silicone edging.

In determining its maximum capabilities, you should not rely on the entire thickness of the case – they will obviously be more modest. The profile of the Geekvape T200 mod novelty, as you have noticed, is asymmetric – the back side is fairly rounded.

Other kits you may prefer:
flum vape near me
xros2

Geekvape H45 RTE Kit review – compatible with Geekvape B coil series

Geekvape H45 RTE(Aegis Geekvape Hero 2) Pod Mod Kit comes with a new tri-proof. Small in size, rich in flavor. Featuring an upgraded metallic shell, more resistant to shock and scratches. 1400mAh battery and a bigger display for a better vape experience. 4ml leakproof pod with top airflow system.

Parameters
Size: 43.1* 28.6* 91.05mm
Battery: built-in 1400mah battery
Output: 5-45W
Screen: 0.96 inch TFT Screen
Modes: Power/ Bypass
Resistance: 0.1-2ohm
Working Temperature: 0-45℃
Charging: 5V/2A
Standby current: <20uA
Drip tip: 510 drip tip
Capacity: 4ml
Resistance: 0.4ohm(25-35W)
0.6ohm(15-25W)

The Geekvape H45 RTE Pod Mod Kit is a collaboration between Geekvape and Rip Trippers. It is powered by a built-in 1400mah battery with a maximum output of 45W. Geekvape H45 RTE Pod Mod adopts buck-boost technology, stable output, and a 0.96-inch TFT screen that clearly displays e-cigarette data.

The Geekvape H45 RTE pod has a 4ml capacity and is top-filled. Aegis Hero 2 comes with a new defense. Small in size and rich in flavor. With an upgraded metal casing, it is more resistant to shocks and scratches.

Other kits we guess you like:
draco disposable vape
kangvapecig

GeekVape WENAX H1 Pod kit – IP67 protected and even a simple one

The last day of the week brought us two new projects at the same time, but with diametrically opposite purposes. First, we’ll take a look at the GeekVape WENAX H1 Pod kit pod system from the most powerful brand on the market right now.

Parameters
Body material: zinc alloy + plastic
Power supply: built-in 1000mAh
Cartridge capacity:2.5ml
Evaporator resistance: 0.7 / 1.4Ω
Power: up to 19W
Working mode: Power
Connector type: magnetic

Well, let’s save serving guests to dessert. In the near future, the new but already very extensive range of WENAX devices will be complemented by new members.

The novelty does not pursue the goal of being “compatible” with the previous model of the same name, however, it is equipped with a nice set of interesting and above all useful options.

The look itself is simple – a modest look complemented by the “standard” shape of the line – a flat bar. The device is well-decorated – except for the logo to distinguish it from competitors and products of the same name.

Sizes are still unknown, but I don’t think it matters – plus/minus them will be the norm for this cut. Even with the presence of a durable metal case, the weight should be minimal.

Geekvape Wenax H1 Pod Cartridge for sale

A very interesting option is protection against dust, moisture and careless handling according to the IP67 standard. So even the “rump” of the device is encased in a silicone case – why is that.

The removable Wenax pod cartridge is proprietary, which means it cannot be replaced by another copy. The latter features a slightly increased capacity compared to similar products, a flat mouthpiece and side fillers that do not allow quick access.

Review: Imitating the way of smoking – Geekvape Wenax K1 SE

Amazingly silky body, amazingly light, showing its flavor appeal with a steady output and an incredibly tight pull. Compatible with the Wenax K1 pod, Wenax K1 SE see-through beast bursts into an amazing vape spark, delivering a mellow MTL flavor with perfect flavor reduction.

Specifications
Dimensions: 114.6mm * 21.6mm * 11.5mm
Weight: 32g
Battery: 600 mAh
Charging: USB Type-C, 5 V
Power: 9-16W
Capacity: 2 ml
Cartridges: 0.8 ohm, 1.2 ohm, 1.0 ohm

Geekvape launched the SE version of the Wenax K1 subsystem that was released some time ago. The device lost some design features, but gained backward compatibility with cartridges from its ancestors, as well as new cartridges in the kit.

The new Wenax K1 SE Pod has a similar design to the previous version and comes in eight different colors. The device has a compact and ergonomic body with rounded edges and modest weight of no more than 32 grams.

The design of the device includes a battery pack and ink cartridges. The device’s battery pack has no physical fire button and automatically puts out 9 to 16 watts of power when the user puffs.

Geekvape Wenax K1 SE Pod Cartridge in stock

The built-in battery with a capacity of 600 mAh can be charged at 5 volts through a modern USB Type-C connector located at the end.

As a cartridge for the device, the new version that comes with the Wenax K1 consumable and kit is available with a resistance of 1.0 ohms. The reservoir is still refillable on the side and can hold up to 2ml of e-liquid.

Summary
Compared to the Geekvape Wenax K1, it eliminates any buttons. Replenish your nic salt and free radical e-juice from the side tank. The cigarette holder is rectangular, fully pneumatic without buttons, and can be smoked for up to 10 seconds.

With 0.8ohm or 1.2ohm KA1 coil, it can be replaced by plug and play installation. Small size, imitating the way of smoking, user-friendly operation, compact frame, very suitable for beginners.

Other kits you may prefer:
esco bars vape
fume vape disposable

Review: Not at all unique for Geek Vape Max100 kit?

Nowadays, Geekvape again brings us surprise. Here is a newcomer from the GeekVape team camp, the developers are once again continuing the tradition by updating outdated models – Geek Vape Max100 kit.

Parameters
Dimensions: 143.8 x 42.06 x 31.5mm (whole kit)
Body material: plastic + metal + silicone
Power supply: 1 x 18650 / 20700 / 21700
Power: 5 – 100W
Voltage range: 0.0 – 8.5V
Operating mode: VW, TC (NI200, SS, TI), TCR, VPC, BYPASS
Temperature range:200℉ – 600℉ / 100℃ – 315℃
Supported resistance: 0.1 – 3.0Ω

This time, the Geekvape Aegis Max, the oldest model in the regulated single-can segment, has undergone a “modernization”. Of course, the fancy name is “encrypted,” but, that’s not surprising. We are already familiar with the complete non-service model – the Z Sub Ohm 2021 Tank.

This is last year’s version and is also sold as a set. The mod itself is executed incorporates style as always – thanks for at least the update. The case is made of durable metal, and as a decoration, it is equipped with traditional shapes and eco-leather inserts embellished with “rags”.

As usual, the size is not the smallest due to the variability of the batteries used. The line starts with a line of five different colors. Again, in accordance with established tradition, the novelty is protected by the IP68 standard – from moisture, dust and careless handling.

The landing pads are made of steel and are surrounded by silicone pads. The exact margin of fit is unknown, however, judging by the thickness of the model, the metric “should” be good. A screw cap on the bottom of the device blocks accesses to the battery compartment. For the latter smaller size, an adapter is provided in the Geekvape new kit.

Other kits we recommend:
ages legend 2
lucid air vapes