Pod vape kit Archives - Page 5 of 5 - Buy E Cigarettes With My Newest E-cigs Review

SMOK RPM40 Pod Mod Kit Preview: Adopting Smok’s New IQ-R Chip

I think you must fall in love with the new SMOK RPM40 at your first sight. So let’s take a close look at this SMOK RPM40 Pod System kit below.

SMOK RPM40 Pod Mod Kit

SMOK RPM40 Pod Mod Kit is an ultra-portable pod mod with a unique cuboid body. Covered with glossy finish and characteristic material, the whole device looks so fancy and stylish. It is small in size but has a battery capacity of 1500mAh which can ensure enough running time and help you avoid frequent charging, and a power range of 1W-40W for you to adjust.

There is the UP/DOWN button, so you can press the UP/DOWN button to get your preferred power. The internal LQ-R chip is a new one, shortening the firing time to 0.001S, and charging time to 2 hours. Different from normal pod devices, RPM40 comes with a 0.96″ screen, so you can see the detailed vaping data clearly presented, like the wattage, resistance, voltage, screen color, puff number, and battery level.

SMOK RPM40 Pod Vape

As for the SMOK RPM40 pod, it comes with two versions of RPM Standard and RPM Nord, both of the versions can be refilled via a side filling port. What’s more, these pods can store up to 4.3ml of e-liquid when RPM Mesh 0.4ohm Coil is installed. However it can be up to 4. 5ml when Nord DC 0.6ohm Coil is installed. And both can bring vapers the long and relaxing vaping time. In addition, these pods are compatible with 4 new vape coils of RPM series and 4 other Smok Nord replacement coil series respectively.

Parameters
Size: 25 * 25 * 99mm
Battery Capacity: 1500mAh
Standby Current: <140uA
E-liquid Capacity: 5ml(Empty pod) / 4.3ml(Standard Pod) / 4.5ml(Nord Pod)
Firing Time: 0.001S
Input Voltage: 3.3V-4.2V
Output Voltage: 0.5V-4.1V
Output Wattage: 1W-40W
Charging Current: 0.88A (Max)
Charging Voltage: 5V
Output Mode: Watt
Resistance Range: 0.2ohm-2.50ohm
Overcharge Voltage: 4.3V
Over-discharge Voltage: 2.4V

So what do you think of the SMOK RPM40? If you want to have a try, you just need go to Vapesourcing online vape shop to get one.

Vaporesso Podstick Preview: Designed For Sub-ohm and MTL Vaping

Today Let me do a short review on the newest Vaporesso Podstick, which is a most friendly use pod device with the ability of sub-ohm and MTL vaping. So how do you like this kind of pod vape kit?

Vaporesso Podstick Pod System Kit 900mAh

Vaporesso Podstick comes in at 18mm x 22mm x 111mm for portable carrying. The battery section has an aluminum housing while the 2mL pod cartridges are made from medical grade PCTG. Moreover, it comes with 900mAh battery and 2ml E-juice capacity for satisfying your daily vaping need without charging.

This Podstick comes with the OMNI Board Mini chipset which can boost your vaping flavor. Besides,you can have a choice for the 3 levels of power and depending on which pod used will determine how much power you’ll get.

Vaporesso Podstick Pod System

There’s an LED battery light indicator light well with 5 different levels, so you know when it’s full and when it needs to be recharged. The PTF-on-top allowing quick and easy filling without taking out the pod. There are two types vape coil heads: 0.6ohm meshed coil and 1.3ohm ccell coil. The 0.6ohm meshed coil is best for MTL vaping and the 1.3ohm ccell coil is suitable for Nic-salts and CBD.

Parameters
Size: 22 * 18 * 111mm
E-juice Capacity: 2ml
Resistance: 1.3ohm CCELL Coil, 0.6ohm Meshed Coil
Battery: 900mAh
Battery Indicator: 20%-40%-60%-80%-100%
Material: PCTG, Aluminum
Charging Current: 1A
Color: Splashed, Blue, Silver, Gold, Phantom, Black

So do you like this kind of Vaporesso pod kit? What’s more, there are six colors for your choice. If you want this kind of pod vape kit, you just need go to Vapesourcing to get one.

Newest IJOY Mercury Pod Kit – Designed For Nicotine Salts Vaping

The iJoy Mercury Pod Vape Kit is a new release from iJoy, which is an exquisite resin pod system starter kit for huge vaping clouds production. At the first sight, it looks so similar to SMOK Trinity Alpha Kit, also a new release from Smok company.

IJOY Mercury Starter Kit

What stands out about the design is the carefully crafted resin material and resin mouthpiece which allow the Mercury to look sleek. This pod vape device is primarily constructed out of zinc alloy and stainless steel construction and is finished with an eye appealing resin design.

Powered by an integrated 1100mAh battery, charging is convenient via a USB port on the control face. Output from the built-in battery is a constant 10 watts and will result in longer than ever vape times. The Mercury has three LED lights, indicating the battery’s charge level, while the other shows the different working conditions of the device. When the battery level is above 70%, the device will have 3 lights turned on, 2 LED lights means the charge level is above 35% while one light means it’s time for a recharge.

The new Mercury Starter Kit has a maximum e-juice capacity of 2ml and features an easy fill method. Furthermore, this device uses the Mercury Coil Family and includes 1 mesh coil as well as 1 regular coil. The Mercury coil has a 1.2 ohm resistance and fires in the range of 8 to 12 watts. The Mesh head has an output range of 6 to 10 watts and a 1.0 ohm resistance. So it’s so ideal for use with different concentrations of nicotine salt based e-liquids.

Main Features：
Personalized designed resin starter kit
Built-in 1100mAh 13550 battery for durable vaping time
Intelligent 3 LED indicator light
Multiple protections for safe vaping
2ml Mercury tank with easy top refill design
Best for nicotine salts vaping with huge clouds

So how do you like this IJOY Mercury Starter Kit? It’s with the great battery capacity and a mesh coil, so it can produce more massive clouds. And do you want to have a try? If so, please go to Vapesourcing online vape store to get one at once.