Buy E Cigarettes With My Newest E-cigs Review

Joyetech Vaal 5000 Pod system kit review – unexpected autonomy

We start the new week with the news that is not the most pleasant-the interesting announcement is a bit late-let’s start our daily affairs. I quickly correct this injustice and show you some of the most interesting similar novelties – Joyetech Vaal 5000 Pod Kit.

Parameters
Dimensions:89 x 46 x 16mm
Case material: plastic
Power supply: built-in 570mAh
Cartridge capacity: 12.0ml
Evaporator resistance: 1.2Ω
Operating mode: Power
Protection: low / high resistance, overheating, short circuit, overcharge / overdischarge
Connector type: magnetic

The plan starts with a copy that has not yet been officially presented, which will be released under the Joyetech brand. Naturally, this news left a certain mark on this article-so far, there is very little information.

But I decided that, generally speaking, there is nothing to wait. We will understand each other-arm ourselves with information-especially because the store is already collecting pre-orders for this topic in a powerful and dominant way.

The size is naturally small and the design is moderate. But it turned out that its appearance is very cute-a plastic shell with rounded corners, compact size, no decoration at all. Regardless of the state and size of the wallet, this novelty is suitable for anyone.
Built-in evaporator of standard resistance, designed just for high-nicotine liquids. The heating element of the latter is made in the form of a grid. As expected, tightening adjustments are not provided. The main body is not burdened with an activation button – the device starts by tightening.

But they provided a small LED indicator of the charge level of the built-in battery. The latter is of very modest capacity. However, this is not a problem at all, since the developers have provided for charging the battery.

Moreover, they made the latter pretty fast. Plus, they supplied their brainchild with a connector for these purposes of a new disposable vape model. I almost forgot – the designers promise a “record” number of puffs for the accessory segment – 5000.

Other kits you may be interested:
hellvape fat rabbit rta for sale
wotofo mdura mini kit for sale

Digiflavor Drop Solo RDA Review – with a notch design

Single coil 22 mm diameter rebuildable dripper, with classic DROP platform, two large column holes are covered by a polished knurled cap with adjustable side airflow control design. Digiflavor Drop Solo 1.5 RDA is a reduced version of the dual coil to delete V1.5 RDA.

It is a single-coil BF rebuildable dripper with a diameter of 22 mm. Digiflavor Drop Solo V1.5 RDA has set its sights on bringing the same fun to single-coil range hoods. Drop Solo V1.5 RDA is made of classic style stainless steel and comes in six colors. The dome eliminates unnecessary decoration and has a round outline.

An 810 Delrin dripper is placed on the top, which is very suitable for chasing clouds and high-wattage electronic cigarettes. The real innovation comes from the original Drop and the design of the build platform and airflow. The build platform implements a two-post single terminal per post with a notch design that allows trimming of coil leads.

It is easy to construct a single vape coil. The coil feet must be installed vertically in the groove and pressed on both sides with hexagonal screws. The air flow is supplied to the spiral coil from the side and can be adjusted by rotating the dome relative to the base.

The spacious deck, coupled with the rather high wall, forms a spacious juice well. The polished knurled cap has a pair of grooves that align with the grooves on the side skirts. The side skirts are fixed on the base and indirectly participate in air flow adjustment. Adjustable side airflow design to support DL and RDL vaping to provide smooth taste.

Other kits you may like:
vandy vape jackaroo mini kit price
voopoo musket kit price

GeekVape Obelisk 200 kit review – how to form a balm on your soul

The Geekvape Obelisk 200 kit consists of the Geekvape Obelisk 200 box module and the Obelisk tank. Geekvape Obelisk 200 mod is made of aluminum, powered by dual 18650 batteries, and has a maximum output power of 200W.

Parameters:
Mod size: 82 x 48.5 x 26mm
Battery: Dual 18650 batteries(not included)
Output range : 5-200W
Resistance range: 0.05-3.0Ω
Longest output/vaping time: 10s
Screen: 0.96 inch TFT color display
Temperature range: 200-600℉/100-315℃
Working temperature: -10-60℃
Charging voltage: USB Type-C, 5V/2A

The Geekvape Obelisk Tank has a lifting and sliding top cover to prevent children from using it and is compatible with Geekvape Z series coils. Obelisk Tank is made of SUS303, with replaceable 810 dripper and 5.5ml capacity, top filling design.

The Geekvape Obelisk sub ohm tank also supports bottom airflow adjustment. The Geekvape Obelisk 200 starter kit is the smallest dual 18650 battery module with a child safety box mod. The cover is easy to remove or click back to replace the battery.

More importantly, the Geekvape Obelisk 200 equipment is equipped with a Geekvape Obelisk Tank with a large capacity of 5.5ml of juice. In addition, the design of Geekvape Obelisk Tank makes full use of the child lock design and easy top filling operation of the tank.

The bottom airflow system with Geekvape Z series coils allows Obelisk 200 mod to enhance flavor and easily create large clouds, making it both powerful and portable.

Other kits you may prefer:
buy voopoo drag x plus professional edition kit
buy voopoo drag x plus professional edition mod

Innokin Coolfire Z80 Kit – a highly durable tank and with a hinged key

The Innokin Coolfire Z80 Kit is developed by Innokin. The Box Mod uses an ergonomic zinc alloy body and is painted in four color combinations. The back is rounded under the handle and decorated with stitched faux leather inserts.

Parameters
Tank: Zenith 2
Max.output current: 28.5A
Resistance range: 0.1ohm-3.5ohm
Body material: Zinc-alloy
Thread material: Stainless steel
Thread type: 510 thread
Charging current: 5V/1.7A
Charging indicator: The display shows the charging status

A sleek control panel, consisting of an ignition button, a display, several small keys and a USB-C port, stretches along the narrow front side. The diameter of the landing site is limited to 25 mm. The use of the battery compartment is restricted by the unscrewed lid with a hinged key.

A proprietary circuit board with a power range of 6 to 80 watts is responsible for control and safety. In addition, preheating and alternative refreshing modes are provided to refresh the flavor and extend the service life of the winding.

An external 18650 battery is used as a battery. Charging should be carried out via USB Type-C with a current of 1.7A. The available resistance range is 0.1 to 3.5 ohms.

The module comes with Zenith 2 with a 5.5 ml protective flask. The filling hole is hidden under the rotating cover. For different types of airflow, the dripper is implemented in duplicate. The pre-installed 0.3 ohm evaporator is located under the dome.

In addition, there is an additional option that retains the 0.8 ohm resistor. The tightness can be adjusted through the ring on the bottom of the vape tank.

Other kits we recommend:
best vaporizer 2021
best rincoe jellybox mini mod

Smok Thiner Pod kit preview – is nothing thinner

The developers of the brand Smok set their sights on the “closest” of some pod lovers-exquisite appearance. If I remember correctly, this is the thinnest device in this format. Moreover, the latter is not just a pod, but a pod mod – Smok Thiner Pod kit.

Parameters
Dimensions: 88 x 43 x 10mm
Weight: 47.3g Body
material: metal + plastic
Power supply: built-in 750mAh
Cartridge capacity: 4.0ml
Evaporator resistance: 1.5Ω
Output power: 5 – 25W
Voltage range: 1.7 – 4.0V
Operating mode : VW
Supported resistance:0.6 – 3.0Ω

However, the rest of the size is quite moderate, and the designers themselves call their new product “e-cigarette cards”. The design is rather modest, just to match the strict rectangular body. The offered line of colors is far from the poorest.

The removable smok thiner cartridge is definitely not bad for such dimensions of capacity, the filling is side, and the mouthpiece is angular. The evaporator is built-in, it is made on a grid, moreover, it is installed inside the cartridge in the “original plane”.

The Smok novelty is powered by a built-in battery, which is not bad for such dimensions. The charging current can be called fast, and the charging connector will please with its relevance.

Other kits you may prefer:
arcfox vape in stock
novo 4 price for sale

SMOK RPM 4 Pod Kit – who accept RPM or LP2 Coils

SMOK RPM 4 Pod Kit is a new compact portable Pod system of the new generation SMOK RPM series. RPM 4 integrates a 1650mAh battery, which can be used for all-day e-cigarettes, using the latest IQ-R chipset, with an instant ignition speed of 0.001 seconds and a maximum output of 60W.

Features:
Dimensions: 103 x 27.9 x 25mm
Wattage Range: 5 – 60W
Input Voltage: 3.3V – 4.2V
Output Voltage: 0.8V – 4.0V
Resistance Range: 0.2 – 2.5ohm
Charging Output: 5V/2A
Standby Current: <100uA

RPM 4 cartridge adopts durable zinc alloy structure, is equipped with a large 0.96 inch TFT color screen and intuitive ignition button, which is easy to operate.

With a stepless airflow control system and 5.0ml cartridge capacity, RPM 4 is equipped with LP2 cartridges compatible with the new LP2 coil and RPM Pod compatible with popular RPM coils, which can extract rich flavor from your favorite electronic juice.

Related kits you may like:
smok arcfox for sale
smok arcfox mod for sale

Geekvape Aegis Nano Kit – a strong material mixture and ergonomically designed

The Geekvape Aegis Nano Pod System Kit is a portable and convenient Pod device, powered by a 800mah built-in battery, with a maximum output power of 30W.

Parameter:
Battery: built-in 800mah battery
Output: 5-30W
Output Voltage: 0.1-6.0V
Input Voltage: 4.5-5.5V
Input Current: 1A (max)
Screen: 0.69 inch Display(OLED black and white screen)
Minimum Voltage: 3.2V土0.1V
Resistance Range: 0.20-3.0Ω
Vaping Time: 10s

The Geekvape Aegis Nano Pod Vape Kit uses a 0.69-inch OLED black and white screen, and the e-cigarette data is clearly displayed. Geekvape Aegis Nano inherits the three protections: shockproof, dustproof and waterproof.

The Geekvape Aegis Nano pod has a capacity of 2ml and a top padding design. The Aegis Nano cartridge supports adjustable airflow for RDL vaping.

Related kits you may prefer:
voopoo vinci x 2 kit for sale
voopoo vinci 2 kit for sale

Exseed Dabcool W3 Vaporizer Kit – offers 3 voltage settings

Dabcool W3 kit is a water pipe evaporator. It has a battery capacity of 450mAh and has a three-level output voltage (3.4V / 3.7V / 4.2V). With super standby time, you can use it while punching. Ceramic heating head makes it heat more blocks.

Features
1. 450mAh battery capacity
2. Three consecutive downshifts
3. Double-click warm up
4. Long press to heat
5. Ceramic heating head
6. Supports e-liquid, tobacco paste and tobacco
7. Optional magnetic structure bracket

In addition, this vaporizer kit also supports electronic cigarette oil, tobacco sauce and tobacco, you can choose the one you like. There is an optional magnetic structure bracket for easy use.

What’s more, it also has a protective design that can protect the charging port from water or other objects. The atomizer protective cover will protect the atomizer and prevent it from burning.

Other kits you may prefer:
bmor selva highest quality disposable vapes
bmor pi plus disposable vape delivery

Is Exseed Dabcool W3 kit fits easily inside a pocket?

The Exseed Dabcool W3 kit is a nectar collector-style portable applicator with a ceramic tip to ensure that you enjoy the pure flavor of the concentrated juice without being disturbed by external tastes.

Specifications:
Brand: Exseed
Product Name: Dabcool W3 Kit
Battery Capacity: 450mAh
Size: 177*46*46mm
Output Voltage: 3.4V/3.7V/4.2V
Colors: Gunmetal, Red, Blue, White

The Dabcool W3 vaporizer kit has a ceramic tip that allows you to tap directly from the container or plate. This is what makes nectar collectors so good. Use a powerful soldering iron tip, say goodbye to butane and heat the soldering tip manually.

Exseed Dabcool W3 Vaporizer Kit for sale

Equipped with a 6.97-inch long tap straw, which emits a strong smell of steam. It is powered by a 450mAh rechargeable battery and provides 3 voltage settings (3.4V/3.7V, 4.2V). Dabcool W3 can be easily put into a pocket, bag or purse, making it an ideal choice for carry around.

The Dabcool W3 kit includes a micro USB charging cable, an additional atomizer heads and a silicone concentrate container. In addition, Dabcool W3 has a silicone atomizer protector, which can be easily carried and prevents damage to the equipment.

Related kits you may prefer:
vangu p20 pro cost
hyppe max flow mesh cost

Geekvape Obelisk 60 – a decent mid-power DTL device

Geekvape Obelisk 60 is a modern pod mod device with an exquisite appearance and stylish design, which provides an excellent DL/RDL vaping experience.

The high-precision chip and integrated circuit board provide the Obelisk 60 cartridge with absolute top performance and a wide range of security features on the board.

Due to Geekvape’s special technology, the output power will not drop due to battery discharge, and the stable output can be maintained even if there is only a small battery capacity left. Fast charging with up to 2 A through the USB Type-C connection.

The Obelisk 60 Pods are made of dark transparent PCTG and have a capacity of 4.0 ml. The liquid enters the container quickly and cleanly through the convenient side filling.

From the kit you get a 0.4ohm coil (50-60 W) and a 0.5ohm coil (40-50 W). The Geekvape P Series Coils provide a first-class intense taste experience and produce dense clouds with a long life.

You may also like other vape devices:
smok nord x for sale
caliburn vape price