Innokin Coolfire Z80 Kit – a highly durable tank and with a hinged key

The Innokin Coolfire Z80 Kit is developed by Innokin. The Box Mod uses an ergonomic zinc alloy body and is painted in four color combinations. The back is rounded under the handle and decorated with stitched faux leather inserts.

Innokin Coolfire Z80 Kit review
Innokin Coolfire Z80 Kit review

Tank: Zenith 2
Max.output current: 28.5A
Resistance range: 0.1ohm-3.5ohm
Body material: Zinc-alloy
Thread material: Stainless steel
Thread type: 510 thread
Charging current: 5V/1.7A
Charging indicator: The display shows the charging status

A sleek control panel, consisting of an ignition button, a display, several small keys and a USB-C port, stretches along the narrow front side. The diameter of the landing site is limited to 25 mm. The use of the battery compartment is restricted by the unscrewed lid with a hinged key.

A proprietary circuit board with a power range of 6 to 80 watts is responsible for control and safety. In addition, preheating and alternative refreshing modes are provided to refresh the flavor and extend the service life of the winding.

An external 18650 battery is used as a battery. Charging should be carried out via USB Type-C with a current of 1.7A. The available resistance range is 0.1 to 3.5 ohms.

buy Innokin Coolfire Z80 Kit
buy Innokin Coolfire Z80 Kit

The module comes with Zenith 2 with a 5.5 ml protective flask. The filling hole is hidden under the rotating cover. For different types of airflow, the dripper is implemented in duplicate. The pre-installed 0.3 ohm evaporator is located under the dome.

In addition, there is an additional option that retains the 0.8 ohm resistor. The tightness can be adjusted through the ring on the bottom of the vape tank.

Other kits we recommend:
best vaporizer 2021
best rincoe jellybox mini mod

Elf Bar RF350 kit review – with a conventional pod shape

The Elf Bar RF350 refillable pod system kit perfectly combines simplicity and portability to some extent. The significance of Elf Bar RF350 to users is not only a piece of equipment, but also a daily companion.

Elf Bar RF350 kit review
Elf Bar RF350 kit review

Brand: Elf Bar
Dimensions: 102.5mm x 18.9mm x 11.4mm
E-liquid Capacity: 1.6ml
Battery Capacity: 350mAh
Charging Voltage: 5V
Overcharge Current: >1A
Coil Resistance: 1.2ohm
Material: PC + ABS, PCTG

The small size makes Elf Bar RF350 easy to carry, and users can almost easily and completely put it in their pockets. Elf Bar RF350 is powered by a 350mAh built-in battery, which can hold up to 1.6 mL of e-liquid and is very lightweight, with a net weight of 20g.

Elf Bar RF350 for sale
Elf Bar RF350 for sale

The Elf Bar RF350 disposable kit also uses a C-type charging system, which can be charged quickly. The small size makes Elf Bar RF350 easy to carry, and users can almost easily and completely put it in their pockets.

Other kits we recommended:
smok rigel mini mod usa
nord 4 usa

Smok Morph 2 kit – with comfortable touch and controllable power

Smok Morph 2 kit has a universal dual 18650 battery layout, a juice evaporation capacity of up to 230 watts and a capacity of up to 7.5 ml, which can hold your favorite juice at any time-control your power and performance.

SMOK Morph 2 Kit review
SMOK Morph 2 Kit review

This bold kit includes Smok Morph 2 Vape Mod and Smok’s thrilling TFV18 Sub Ohm Vape Tank pairing to create a delicious duo in each vaper’s craziest dream. Obtaining impressive functions and excellent safety functions directly from Smok’s smart IQ-S control chip, the powerful Morph 2 is not a toolkit that can be delivered.

Just press the button and push the top to the side to start filling the TFV18 tank with your favorite e-liquid. SMOK TFV18 vape tank is compatible with newly designed replaceable mesh coils: 0.33ohm TFV18 mesh coil and 0.15ohm TFV18 double mesh coil.

buy SMOK Morph 2 Kit
buy SMOK Morph 2 Kit

Add the Smok Morph 2 Vape Mod Starter Kit directly to your next online shop store near me order! The SMOK Morph 2 kit consists of SMOK Morph 2 Mod and SMOK TFV18 vape tank. Morph 2 is designed with zinc alloy to improve durability, while the soft leather covered on the surface has a comfortable touch.

Some pod mod kits we recommend:
lost vape thelema dna250c mod for sale
ijoy cigpet capo mod for sale

OXVA Velocity 100W – unipro coils to enhance flavor

The OXVA Velocity 100W Pod kit is the smallest single 21700 mod Pod kit with a 510-type creative connector. The 510-type connector can be removed by tools to provide more possibilities and will not fall off when the water tank or lid is unscrewed.

OXVA Velocity Pod Mod Kit for sale
OXVA Velocity Pod Mod Kit for sale

Size: 100.5*41*27mm
Colors: Black Leather, Brown Leather, Carbon Fiber, Rose Gold, Gold Ripple, Black Marble
Buck-Boost Converter PCBA
Battery: Powered By Single High-Rate 21700/20700/18650(Sold Separately)
Output Power Range: 5-100W
Working Modes: Smart, Power, Voltage
Output Voltage: 0.5-8.0V
Resistance Range: 0.1-2.0ohm
0.96 inch Colorful TFT Screen
Creative 510 Connection

You can bend the connection to switch to the AIO system, or you can pull up to drip the juice. Velocity mod is powered by a single 21700 or 20700 battery, including 18650 battery adapter, the output power is adjustable from 5W to 100W, there are 3 working modes to switch, you can choose smart, power and voltage.

buy OXVA Velocity Pod Mod Kit
buy OXVA Velocity Pod Mod Kit

In smart mode, OXVA Mod will generate the power range of the vape coil based on the resistance of the coil to prevent the coil from overheating. The 0.96-inch screen display will clearly display electronic data for you, with a total of 6 color themes.

Unipro Pod can hold 5ml of e-juice and is compatible with Unipro Coils and Uni Coils, including 0.15ohm and 0.3ohm Mesh coils. It will have a large contact area with e-juice and will heat quickly and evenly, bringing you a huge cloud of richness Taste Unipro RBA is the first MTL and RDL RBA. The design with adjustable airflow at the bottom will bring you a different e-cigarette experience.

Other new devices we recommended:
morph 2 vape for sale
tfv18 for sale

Lost Vape Thelema kit review – using the AFC under the coil head

The appearance and appearance of Lost Vape’s Thelema kit is similar to the Smok RPM Lite Pod kit. That’s not a bad thing! Slim and easy to carry, very suitable for travel.

Lost Vape Thelema kit review
Lost Vape Thelema kit review

Internal 3000mAh battery
Maximum wattage output: 80w
Powered by the Quest Chipset
Large TFT color display screen
Zinc alloy and Leather construction
Dual airflow chamber
Compatible with the new Thelema Pod

One key difference is definitely structure. The Thelema pod mod kit is made of zinc alloy and leather material, which has a better quality feel. It is powered by a 3,000mAh internal battery, which can use up to 80w.

Another outstanding feature is the Lost Vape Quest chipset. It uses a familiar three-key layout, which is easy for beginners and advanced vapers. There is also a large TFT color display, which can be customized with 6 different color themes. On the side is the position of the double airflow chamber, giving you super smooth traction.

buy Lost Vape Thelema
buy Lost Vape Thelema

The complete kit includes Thelema refillable vape pods. Its maximum e-juice capacity is 4ml, which can be filled from the top. Large capacity and easy filling means less filling time and more time to fill.

In addition, you do get two coil heads. The first is a 0.2 ohm mesh coil, and the other is a 0.3 ohm clapton mesh coil. Because they are mesh coils, you will know that they will last a long time and provide a strong flavor.

Other pod you may like:
uwell aeglos kit release date
eleaf istick p100 release date

VOOPOO Argus Pro – a variety of smart functions

VOOPOO Argus Pro pod mod kit has elegant design, lightweight size, 3000mAh internal battery capacity, 5-80W adjustable power range, 4.5ml electronic juice capacity, 0.96 inch display, fast ignition speed, innovative unlimited airflow system, and more A security protection. In this article, you will learn more details about it.

VOOPOO Argus Pro Pod Mod Kit review
VOOPOO Argus Pro Pod Mod Kit review

Comes With:
1* ARGUS Pro Device
1* PnP Pod (4.5ml)
1* PnP-VM6, 0.15ohm
1* PnP-VM1, 0.3ohm
1* Type-C Cable
1* User Manual

Argus Pro Pod Kit is a user-friendly high-performance Pod Mod kit. It is made of zinc alloy and leather and has an elegant appearance and compact size. Voopoo Argus Pro can be used with a 3000mAh battery, and the power range can be adjusted between 5 to 80W.

buy VOOPOO Argus Pro Pod Mod Kit
buy VOOPOO Argus Pro Pod Mod Kit

In addition, Argus Pro is also equipped with a new upgraded 4.5ml magnetic suction cup, which will provide the simplest and most hygienic way of refueling. The kit includes two PnP coils that are ideal for DL (direct lung) pumping: 0.3 ohms PnP-VM1 coil and 0.15 ohm PnP-VM6 coil. In addition, the Argus Pro pod is compatible with all coils in the VOOPOO PnP vape coil series.

Other pod mod we recommend:
vapefly siegfried kit for sale
aspire mixx mod for sale

Review: Kangvape disposable kit, an on-the-go vape – Onee Stick pod vape kit

In this article, we will discuss the most complete disposable Onee Stick pod vape kit provided by the manufacturer Kangvape. Recently, disposable devices are increasingly found in various online stores.

Kangvape Onee Stick Disposable Vape kit for sale
Kangvape Onee Stick Disposable Vape kit for sale

Dimensions: 109mm * 19mm
Battery: 1100mAh
Volume: 6.2ml
Strength: 5%
Autonomy: 1800 puffs
Number of flavors: 10

Indeed, more and more Chinese manufacturers (not only) regularly release samples, and some manufacturers have even re-certified their qualifications for one-off production activities. For example, the Chinese company Kangvape new vape kit has the Onee Stick, the next device in the above format.

buy Kangvape Onee Stick Disposable Vape
buy Kangvape Onee Stick Disposable Vape

Onee Stick  disposable vape uses a typical one-off design, but has its own external functions. The top of the device is an ergonomic cigarette holder, and the main body of the device (depending on the color) will have a pattern that reminds one of one flavor or another. The height of the device is 109mm and the diameter is 19mm.

The color change just mentioned applies to the taste index of novelty. Therefore, a total of ten choices are provided for users, mainly fruits or fresh fruits. The strength of the pre-filled liquid is 5% saline nicotine.

The most interesting thing about the Onee stick is the dry technical characteristics. In addition to the impressive 6.2ml volume, the vape device also has a very large built-in 1100mAh battery. According to the creator’s guarantee, the battery should be enough to charge 1800 puffs on average.

Other similar pod you may like:
kangvape slick plus price
xtra disposable price

24mm Hellvape Destiny RTA Review

Hellvape Destiny Rebuildable Tank Atomizer is the newest rebuildable tank atomizer from Hellvape, it features smart angled post design for coil installation and cutting extra coil easily. The adjustable airflow intake is at the base of Destiny RTA, the knurled grip design makes the adjustable to be easy.


• 2ml or 4ml e-juice capacity with optional bubble glass tube
• PCTG(black) or ULTEM(wee yellow) tube version is optional
• Convenient top filling design
• Generous build space and post holes
• Smart angled post design for coil installation and cutting coil legs more easily
• Two sides airflow system concentrating to the coil
• Adjustable bottom airflow with angle
• Knurled grip to adjust the airflow with ease

It is pre-order now at our site

A Nice Temperature Controlled Vape Pen Starter Kit – Uwell Nunchaku 80W Review

Uwell, as known for its legendary Crown 3 tank and the stellar Valyrian sub ohm tank monster, I konw how creative the company is, I shouldn’t be surprised that its first entry is a unique, single-battery stick mod – the Uwell Nunchaku. Tdoay we are going to talk about it.

The Uwell Nunchaku was named after the handled assault weapon used by ninjas and occasional Stallone victims, and Uwell has produced an ergonomic design that fits into your hand perfectly and kind of resembles a nunchuck if you squint and imagine a little. It’s made from solid stainless steel so feels quite sturdy and the anodized finish seems durable. With the simple enlarged fire button placed at the top of the pen with 2 small adjustable buttons towards the bottom, just above the tiny screen. It small OLED Display is well placed and surprisingly easy to read, giving you all the information you need like battery life, wattage or temperature (pending on the mode you’re in), the resistance of the coil in the tank, and the voltage. Micro-USB slot is on the back, opposing the fire button. On the base we have the battery knob, which has butter smooth threads.

Nunchaku 80W Full Kit

Powred by a single high drain 18650 battery, the Uwell Nunchaku kit can fire up from 5W to 80W, and this vape pen has multiple modes that include your standard wattage mode, temperature control, and those who like to bypass both of them you can run it unregulated straight from the battery like other vape pens.

About its performance. Performance on the UWELL Nunchaku 80W TC kit is quite surprising. Set to around 50W which is the ideal level for this 0.25-ohm coil the airflow is really good and reate some huge flavorful clouds. Sadly you cannot adjust wattage when using Nickel or Stainless Steel but it’s definitely a cool feature to have on a device like this. Vapor quality is pretty good but nothing to blow your mind.

Nunchaku uwell Kit

In a word, highly recommend it to those vape pen lovers who love a a removable 18650 battery pen mod.

By the way, I think you will like this bazooka blue rasp ice e-juice to pair with this kit.


The voopoo drag 157W resin edition utilizes dual external cells with up to 157 watts of output. It also features a super mode, a wide range of temperature modes and is built with a US Gene Chip for safe, stable and the fastest firing speed in the marketplace.

In addition to its high-end technical design, the way the mod looks is also modern. The design is very streamlined with a colorful carbon fiber panel on one side, that comes in either black or brown, and a battery cover with a large Drag logo. The device is also portable with dimensions of 54mm x 90mm x 24mm. On the control face, you will see a crystal clear OLED display with a menu that displays current battery level, mode, resistance or voltage and wattage. The menu and mod can be also be customized via computer desktop software from the Voopoo website. Custom settings that can be changed include personal logo, puff time, screen brightness, power curve and the default TC control wire setting. At the top of the unit, there’s a 510 springloaded connection bezel for level atomizer installs.

drag mod resin version

The mod is constructed with a 32 bit US Gene Fun Chip from the world’s largest provider of eCig chips. As a result, it can fire with an output up to 130 watts with atomizers that have a resistance of 0.05ohm and up or 157 watts if the atomizer resistance is 0.10ohm or higher. Clicking the large firing button three times allows for easily switching between modes. In addition to power mode, there’s also three temperature control modes that are compatible with either nickel, titanium or stainless steel coils up to 600 degrees Fahrenheit. One unique benefit of the Voopoo Drag is that it has the fastest firing speed of 0.025 seconds for instant vapor production. And, all the safety features a mod could possibly need or built into the device including reverse polarity protection, switch timeout protection, over-temperature protection, over-current protection, over charge protection, over discharge protection and short circuit protection.

Two dual external 18650 power the Voopoo Drag Mod. They are easily installed into the battery bay by removing the Carbon Fiber panel that stays in place via four powerful magnets. A micro USB onboard charging system also allows for topping off the cells without removing them. Balance charging technology ensures a safe vape experience and occurs with a current of 5V/1800mA. The USB port is also used for future firmware upgrades in case new technologies come into the vape marketplace.